We have hundreds of exchangers in stock
Heating
Heat pumps
Solars
Beer wort
Pools
Oil cooling
Industry
SWEP B8THx40 Heat exchanger
SWEP B8THx40 Heat exchanger
Price without VAT: |
225.00 € |
Price with VAT: | 272.25 € |
Delivery costs: | EU 14 € (we deliver only to the EU) |
Availability: | >5 in stock |
Typical use: | Classic plate heat exchanger (residentail units), for water heating, as a plate cooler (oil/water), solar collectors, etc. It is built for high pressures, therefore also as a condenser. Capacity 35 to 70 kW. It can often be replaced by its cheaper low-pressure version: E8TH. |
Recommended max. flow 1): | 3 m3/h |
Brazing material: | copper |
Model version: | plate exchanger from stainless steel (AISI 316) |
Dimensions (H × W × D): | 317 × 76 × 102 mm |
Related products: | Insulation EPP 8Tx40, Ref 8Tx60. Welding sleeve: 3/4" to DN15. |
Testing pressure: | 69 bar |
Weight: | 4.5 kg |
Product sheet: | B8.pdf |
Item No. 2): | 14361-040 | B8THx40/1P-SC-M 4x3/4"&16(20) | - | B8THx40/1P-NC-M | - | B8THx40/1P-SN-S | - | B8THx40/1P-SN-M |
|
Connections: | 14361-040 | 4x 3/4" ISO G ext. thread (can also be soldered) |
|
| |
Notes: | Click to expand notes |
1) | The maximum recommended flow is calculated for water to limit pressure losses to 30 kPa. Also the flow velocity at the inlet to the exchanger is kept under 5.5 m/s to prevent erosion from water. The pressure losses increase proportionally to the square of the flow rate. |
2) | SC-Y intermediate pressure: for water/water use (approx. 20 bar) SC-S standard pressure: for water/water use, some refrigerants (approx. 30 bar) SC-M medium pressure: for refrigerants (approx. 48 bar) SC-F intermediate pressure: for refrigerants (approx. 50 bar) SC-H high pressure: for refrigerants (approx. 55 bar) SC-D, SC-E higher pressure: for CO2 (approx. 55 bar) SC-U ultra high pressure: for CO2 (approx. 100 bar)
SC-S: plates AISI 316, copper brazing NSC-M: plates AISI 316, cover plates AISI 304, copper brazing NC-S: plates AISI 304, copper brazing SN-S: plates AISI 316, nickel brazing MC-S: plates SMO 254, copper brazing SPS-S: plates AISI 316, AISI 316 brazing (All Steel) |
SWEP B8THx10 Heat exchanger
SWEP B8THx10 Heat exchanger
Price without VAT: 140.00 € (Price with VAT: 169.40 €) in 3 days Connections: 4x 3/4" ISO G ext. thread (can also be soldered) Price without VAT: 140.00 € (Price with VAT: 169.40 €) >5 in stock Connections: 2x 3/4" ISO G int. thread with hex + 2x 1/2" ISO G int. thread with hex |
Delivery costs: | EU 14 € (we deliver only to the EU) |
Typical use: | Classic plate heat exchanger (residentail units), for water heating, as a plate cooler (oil/water), solar collectors, etc. It is built for high pressures, therefore also as a condenser. Capacity 10 to 20 kW. It can often be replaced by its cheaper low-pressure version: E8TH. |
Recommended max. flow 1): | 0.8 m3/h |
Brazing material: | copper |
Model version: | plate exchanger from stainless steel (AISI 316) |
Dimensions (H × W × D): | 317 × 76 × 34 mm |
Related products: | Insulation EPP 8Tx20, Ref 8Tx30. Welding sleeve: 3/4" to DN15. |
Testing pressure: | 69 bar |
Weight: | 2.2 kg |
Product sheet: | B8.pdf |
Item No. 2): | 14361-010 | B8THx10/1P-SC-M 4x3/4"&16(20) | 14349-010 | B8THx10/1P-SC-M 2x3/4"INT HEX(20)+2x1/2"INT HEX(20) | - | B8THx10/1P-NC-M | - | B8THx10/1P-SN-S | - | B8THx10/1P-SN-M |
|
| |
SWEP B8THx14 Heat exchanger
SWEP B8THx14 Heat exchanger
Price without VAT: |
153.00 € |
Price with VAT: | 185.13 € |
Delivery costs: | EU 14 € (we deliver only to the EU) |
Availability: | >5 in stock |
Typical use: | Classic plate heat exchanger (residentail units), for water heating, as a plate cooler (oil/water), solar collectors, etc. It is built for high pressures, therefore also as a condenser. Capacity 10 to 20 kW. It can often be replaced by its cheaper low-pressure version: E8TH. |
Recommended max. flow 1): | 1.2 m3/h |
Brazing material: | copper |
Model version: | plate exchanger from stainless steel (AISI 316) |
Dimensions (H × W × D): | 317 × 76 × 43 mm |
Related products: | Insulation EPP 8Tx20, Ref 8Tx30. Welding sleeve: 3/4" to DN15. |
Testing pressure: | 69 bar |
Weight: | 2.5 kg |
Product sheet: | B8.pdf |
Item No. 2): | 14361-014 | B8THx14/1P-SC-M 4x3/4"&16(20) | - | B8THx14/1P-NC-M | - | B8THx14/1P-SN-S | - | B8THx14/1P-SN-M |
|
Connections: | 14361-014 | 4x 3/4" ISO G ext. thread (can also be soldered) |
|
| |
SWEP B8THx16 Heat exchanger
SWEP B8THx16 Heat exchanger
Price without VAT: |
153.00 € |
Price with VAT: | 185.13 € |
Delivery costs: | EU 14 € (we deliver only to the EU) |
Availability: | 1 in stock |
Typical use: | Classic plate heat exchanger (residentail units), for water heating, as a plate cooler (oil/water), solar collectors, etc. It is built for high pressures, therefore also as a condenser. Capacity 10 to 25 kW. It can often be replaced by its cheaper low-pressure version: E8TH. |
Recommended max. flow 1): | 1.4 m3/h |
Brazing material: | copper |
Model version: | plate exchanger from stainless steel (AISI 316) |
Dimensions (H × W × D): | 317 × 76 × 47 mm |
Related products: | Insulation EPP 8Tx20, Ref 8Tx30. Welding sleeve: 3/4" to DN15. |
Testing pressure: | 69 bar |
Weight: | 2.7 kg |
Product sheet: | B8.pdf |
Item No. 2): | 14361-016 | B8THx16/1P-SC-M 4x3/4"&16(20) | - | B8THx16/1P-NC-M | - | B8THx16/1P-SN-S | - | B8THx16/1P-SN-M |
|
Connections: | 14361-016 | 4x 3/4" ISO G ext. thread (can also be soldered) |
|
| |
SWEP B8THx20 Heat exchanger
SWEP B8THx20 Heat exchanger
Price without VAT: 168.00 € (Price with VAT: 203.28 €) >5 in stock Connections: 4x 3/4" ISO G ext. thread (can also be soldered) Price without VAT: 168.00 € (Price with VAT: 203.28 €) >5 in stock Connections: 2x 3/4" ISO G int. thread with hex + 2x 1/2" ISO G int. thread with hex |
Delivery costs: | EU 14 € (we deliver only to the EU) |
Typical use: | Classic plate heat exchanger (residentail units), for water heating, as a plate cooler (oil/water), solar collectors, etc. It is built for high pressures, therefore also as a condenser. Capacity 15 to 35 kW. It can often be replaced by its cheaper low-pressure version: E8TH. |
Recommended max. flow 1): | 1.7 m3/h |
Brazing material: | copper |
Model version: | plate exchanger from stainless steel (AISI 316) |
Dimensions (H × W × D): | 317 × 76 × 56 mm |
Related products: | Insulation EPP 8Tx20, Ref 8Tx30. Welding sleeve: 3/4" to DN15. |
Testing pressure: | 69 bar |
Weight: | 3 kg |
Product sheet: | B8.pdf |
Item No. 2): | 14361-020 | B8THx20/1P-SC-M 4x3/4"&16(20) | 14349-020 | B8THx20/1P-SC-M 2x3/4"INT HEX(20)+2x1/2"INT HEX(20) | - | B8THx20/1P-NC-M | - | B8THx20/1P-SN-S | - | B8THx20/1P-SN-M |
|
| |
SWEP B8THx24 Heat exchanger
SWEP B8THx24 Heat exchanger
Price without VAT: |
181.00 € |
Price with VAT: | 219.01 € |
Delivery costs: | EU 14 € (we deliver only to the EU) |
Availability: | >5 in stock |
Typical use: | Classic plate heat exchanger (residentail units), for water heating, as a plate cooler (oil/water), solar collectors, etc. It is built for high pressures, therefore also as a condenser. Capacity 20 to 40 kW. It can often be replaced by its cheaper low-pressure version: E8TH. |
Recommended max. flow 1): | 2 m3/h |
Brazing material: | copper |
Model version: | plate exchanger from stainless steel (AISI 316) |
Dimensions (H × W × D): | 317 × 76 × 65 mm |
Related products: | Insulation EPP 8Tx30, Ref 8Tx30. Welding sleeve: 3/4" to DN15. |
Testing pressure: | 69 bar |
Weight: | 3.2 kg |
Product sheet: | B8.pdf |
Item No. 2): | 14361-024 | B8THx24/1P-SC-M 4x3/4"&16(20) | - | B8THx24/1P-NC-M | - | B8THx24/1P-SN-S | - | B8THx24/1P-SN-M |
|
Connections: | 14361-024 | 4x 3/4" ISO G ext. thread (can also be soldered) |
|
| |
SWEP B8THx30 Heat exchanger
SWEP B8THx30 Heat exchanger
Price without VAT: 196.00 € (Price with VAT: 237.16 €) 5 in stock Connections: 4x 3/4" ISO G ext. thread (can also be soldered) Price without VAT: 196.00 € (Price with VAT: 237.16 €) >5 in stock Connections: 2x 3/4" ISO G int. thread with hex + 2x 1/2" ISO G int. thread with hex |
Delivery costs: | EU 14 € (we deliver only to the EU) |
Typical use: | Classic plate heat exchanger (residentail units), for water heating, as a plate cooler (oil/water), solar collectors, etc. It is built for high pressures, therefore also as a condenser. Capacity 25 to 50 kW. It can often be replaced by its cheaper low-pressure version: E8TH. |
Recommended max. flow 1): | 2.5 m3/h |
Brazing material: | copper |
Model version: | plate exchanger from stainless steel (AISI 316) |
Dimensions (H × W × D): | 317 × 76 × 79 mm |
Related products: | Insulation EPP 8Tx30, Ref 8Tx30. Welding sleeve: 3/4" to DN15. |
Testing pressure: | 69 bar |
Weight: | 3.7 kg |
Product sheet: | B8.pdf |
Item No. 2): | 14361-030 | B8THx30/1P-SC-M 4x3/4"&16(20) | 14349-030 | B8THx30/1P-SC-M 2x3/4"INT HEX(20)+2x1/2"INT HEX(20) | - | B8THx30/1P-NC-M | - | B8THx30/1P-SN-S | - | B8THx30/1P-SN-M |
|
| |
Chat
⬤
VZH Ostrava, s.r.o.
Pohraniční 1280/112
703 00 Ostrava-Vítkovice
Czech Republic
L | +44 74 9187 2667 |
E | +44 74 9187 2667 |
B | info@heat-exchangers.uk |
| sales@heat-exchangers.uk |