Heating
Heat pumps
Solars
Beer wort
Pools
Oil cooling
Industry
Select model:
SWEP B35Hx90/1P-SC-S Plate heat exchanger
| Price without VAT: | £1,153.15 (1,280.00 €) | ||||||||||||||||||||||||||||||
| Price with VAT: | £1,383.78 | ||||||||||||||||||||||||||||||
| Availability: | in 5 days | ||||||||||||||||||||||||||||||
| Typical use: | For district heating 170 to 510 kW, heat recovery, ventilation and air conditioning. Also for combined heat and power and cooling of motor oils. As a steam exchanger (steam/water exchanger). Different plate designs to optimize performance and pressure losses. | ||||||||||||||||||||||||||||||
Recommended max. flow 1): | 25 m3/h | ||||||||||||||||||||||||||||||
| Model version: | plate exchanger from stainless steel (AISI 316) | ||||||||||||||||||||||||||||||
| Item No. 2) 4): |
| ||||||||||||||||||||||||||||||
| Brazing material: | copper | ||||||||||||||||||||||||||||||
| Dimensions (H × W × D): | 393 × 243 × 230 mm | ||||||||||||||||||||||||||||||
| Connections: | 4x ext. thread 2" or 2x solder ø48 + 2x ext. thread 3/2" | ||||||||||||||||||||||||||||||
| Related products: | Insulation HVAC 35x100 | ||||||||||||||||||||||||||||||
| Testing pressure: | 50 bar | ||||||||||||||||||||||||||||||
| Weight: | 36.5 kg | ||||||||||||||||||||||||||||||
| Product sheet: | B35H.pdf  , B35t-cz.pdf | ||||||||||||||||||||||||||||||
| Notes: | Click to expand notes | ||||||||||||||||||||||||||||||
| 1) | The maximum recommended flow is calculated for water to limit pressure losses to 30 kPa. Also the flow velocity at the inlet to the exchanger is kept under 5.5 m/s to prevent erosion from water. | ||||||||||||||||||||||||||||||
| 2) | SC-Y intermediate pressure: for water/water use (approx. 20 bar) SC-S standard pressure: for water/water use, some refrigerants (approx. 30 bar) SC-M medium pressure: for refrigerants (approx. 48 bar) SC-F intermediate pressure: for refrigerants (approx. 50 bar) SC-H high pressure: for refrigerants (approx. 55 bar) SC-D, SC-E higher pressure: for CO2 (approx. 55 bar) SC-U ultra high pressure: for CO2 (approx. 100 bar) SC-S: plates AISI 316, copper brazing NC-S: plates AISI 304, copper brazing SN-S: plates AISI 316, nickel brazing SPS-S: plates AISI 316, AISI 316 brazing (All Steel) | ||||||||||||||||||||||||||||||
| 4) | Pressure diagram is shown for models highlighted in bold. PED directive demands pressure test until 225 °C therefore, the diagram is shown until 225 °C. Let you extrapolate design `pressure for a higher temperature. |
£ ▿
Kč 
€ 