We have hundreds of exchangers in stock
Heating
Heat pumps
Solars
Beer wort
Pools
Oil cooling
Industry
SWEP B65x80 Plate heat exchanger
SWEP B65x80 Plate heat exchanger
from factory (about 8 weeks) from factory (about 8 weeks) from factory (about 8 weeks) |
| Typical use: | Brazed plate heat exchanger for very large heat loads in industry. Also suitable as a steam exchanger, condenser in refrigeration, for very large heat pumps, etc. Available with plates H, M or L to balance capacity and pressure losses. |
| Recommended max. flow 1): | 40 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 864 × 363 × 203 mm |
| Related products: | Compact counter flange kit DN100 CS, DN100 |
| Testing pressure: | 49 bar |
| Weight: | 125 kg |
| Product sheet: | B65.pdf  |
| Item No. 2): | 10890-080 | B65Lx80/1P-SC-S 4xDN100C cs(54) | | - | B65Lx80/1P-SC-H | 10892-080 | B65Mx80/1P-SC-S 4xDN100C cs(54) | | - | B65Mx80/1P-SC-H | 10888-080 | B65Hx80/1P-SC-S 4xDN100C cs(54) | | - | B65Hx80/1P-SC-H |
|
| | |
| Notes: | Click to expand notes |
| 1) | The maximum recommended flow is calculated for water to limit pressure losses to 30 kPa. Also the flow velocity at the inlet to the exchanger is kept under 5.5 m/s to prevent erosion from water. The pressure losses increase proportionally to the square of the flow rate. |
| 2) | SC-Y intermediate pressure: for water/water use (approx. 20 bar)
SC-S standard pressure: for water/water use, some refrigerants (approx. 30 bar)
SC-M medium pressure: for refrigerants (approx. 48 bar)
SC-F intermediate pressure: for refrigerants (approx. 50 bar)
SC-H high pressure: for refrigerants (approx. 55 bar)
SC-D, SC-E higher pressure: for CO2 (approx. 55 bar)
SC-U ultra high pressure: for CO2 (approx. 100 bar)
SC-S: plates AISI 316, copper brazing
NSC-M: plates AISI 316, cover plates AISI 304, copper brazing
NC-S: plates AISI 304, copper brazing
SN-S: plates AISI 316, nickel brazing
MC-S: plates SMO 254, copper brazing
SPS-S: plates AISI 316, AISI 316 brazing (All Steel) |
SWEP B65x110 Plate heat exchanger
SWEP B65x110 Plate heat exchanger
from factory (about 8 weeks) from factory (about 8 weeks) from factory (about 8 weeks) |
| Typical use: | Brazed plate heat exchanger for very large heat loads in industry. Also suitable as a steam exchanger, condenser in refrigeration, for very large heat pumps, etc. Available with plates H, M or L to balance capacity and pressure losses. |
| Recommended max. flow 1): | 50 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 864 × 363 × 272 mm |
| Related products: | Compact counter flange kit DN100 CS, DN100 |
| Testing pressure: | 49 bar |
| Weight: | 156 kg |
| Product sheet: | B65.pdf |
| Item No. 2): | 10890-110 | B65Lx110/1P-SC-S 4xDN100C cs(54) | | - | B65Lx110/1P-SC-H | 10892-110 | B65Mx110/1P-SC-S 4xDN100C cs(54) | | - | B65Mx110/1P-SC-H | 10888-110 | B65Hx110/1P-SC-S 4xDN100C cs(54) | | - | B65Hx110/1P-SC-H |
|
| | |
SWEP B65x140 Plate heat exchanger
SWEP B65x140 Plate heat exchanger
from factory (about 8 weeks) from factory (about 8 weeks) from factory (about 8 weeks) |
| Typical use: | Brazed plate heat exchanger for very large heat loads in industry. Also suitable as a steam exchanger, condenser in refrigeration, for very large heat pumps, etc. Available with plates H, M or L to balance capacity and pressure losses. |
| Recommended max. flow 1): | 70 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 864 × 363 × 342 mm |
| Related products: | Compact counter flange kit DN100 CS, DN100 |
| Testing pressure: | 49 bar |
| Weight: | 187 kg |
| Product sheet: | B65.pdf |
| Item No. 2): | 10890-140 | B65Lx140/1P-SC-S 4xDN100C cs(54) | | - | B65Lx140/1P-SC-H | 10892-140 | B65Mx140/1P-SC-S 4xDN100C cs(54) | | - | B65Mx140/1P-SC-H | 10888-140 | B65Hx140/1P-SC-S 4xDN100C cs(54) | | - | B65Hx140/1P-SC-H |
|
| | |
SWEP B65x170 Plate heat exchanger
SWEP B65x170 Plate heat exchanger
from factory (about 8 weeks) from factory (about 8 weeks) from factory (about 8 weeks) |
| Typical use: | Brazed plate heat exchanger for very large heat loads in industry. Also suitable as a steam exchanger, condenser in refrigeration, for very large heat pumps, etc. Available with plates H, M or L to balance capacity and pressure losses. |
| Recommended max. flow 1): | 80 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 864 × 363 × 411 mm |
| Related products: | Compact counter flange kit DN100 CS, DN100 |
| Testing pressure: | 49 bar |
| Weight: | 218 kg |
| Product sheet: | B65.pdf |
| Item No. 2): | 10890-170 | B65Lx170/1P-SC-S 4xDN100C cs(54) | | - | B65Lx170/1P-SC-H | 10892-170 | B65Mx170/1P-SC-S 4xDN100C cs(54) | | - | B65Mx170/1P-SC-H | 10888-170 | B65Hx170/1P-SC-S 4xDN100C cs(54) | | - | B65Hx170/1P-SC-H |
|
| | |
SWEP B65x200 Plate heat exchanger
SWEP B65x200 Plate heat exchanger
from factory (about 8 weeks) from factory (about 8 weeks) from factory (about 8 weeks) |
| Typical use: | Brazed plate heat exchanger for very large heat loads in industry. Also suitable as a steam exchanger, condenser in refrigeration, for very large heat pumps, etc. Available with plates H, M or L to balance capacity and pressure losses. |
| Recommended max. flow 1): | 90 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 864 × 363 × 481 mm |
| Related products: | Compact counter flange kit DN100 CS, DN100 |
| Testing pressure: | 49 bar |
| Weight: | 249 kg |
| Product sheet: | B65.pdf |
| Item No. 2): | 10890-200 | B65Lx200/1P-SC-S 4xDN100C cs(54) | | - | B65Lx200/1P-SC-H | 10892-200 | B65Mx200/1P-SC-S 4xDN100C cs(54) | | - | B65Mx200/1P-SC-H | 10888-200 | B65Hx200/1P-SC-S 4xDN100C cs(54) | | - | B65Hx200/1P-SC-H |
|
| | |
SWEP B65x230 Plate heat exchanger
SWEP B65x230 Plate heat exchanger
from factory (about 8 weeks) from factory (about 8 weeks) from factory (about 8 weeks) |
| Typical use: | Brazed plate heat exchanger for very large heat loads in industry. Also suitable as a steam exchanger, condenser in refrigeration, for very large heat pumps, etc. Available with plates H, M or L to balance capacity and pressure losses. |
| Recommended max. flow 1): | 100 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 864 × 363 × 551 mm |
| Related products: | Compact counter flange kit DN100 CS, DN100 |
| Testing pressure: | 49 bar |
| Weight: | 280 kg |
| Product sheet: | B65.pdf |
| Item No. 2): | 10890-230 | B65Lx230/1P-SC-S 4xDN100C cs(54) | | - | B65Lx230/1P-SC-H | 10892-230 | B65Mx230/1P-SC-S 4xDN100C cs(54) | | - | B65Mx230/1P-SC-H | 10888-230 | B65Hx230/1P-SC-S 4xDN100C cs(54) | | - | B65Hx230/1P-SC-H |
|
| | |
SWEP B65x260 Plate heat exchanger
SWEP B65x260 Plate heat exchanger
from factory (about 8 weeks) from factory (about 8 weeks) from factory (about 8 weeks) |
| Typical use: | Brazed plate heat exchanger for very large heat loads in industry. Also suitable as a steam exchanger, condenser in refrigeration, for very large heat pumps, etc. Available with plates H, M or L to balance capacity and pressure losses. |
| Recommended max. flow 1): | 110 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 864 × 363 × 620 mm |
| Related products: | Compact counter flange kit DN100 CS, DN100 |
| Testing pressure: | 49 bar |
| Weight: | 311 kg |
| Product sheet: | B65.pdf |
| Item No. 2): | 10890-260 | B65Lx260/1P-SC-S 4xDN100C cs(54) | | - | B65Lx260/1P-SC-H | 10892-260 | B65Mx260/1P-SC-S 4xDN100C cs(54) | | - | B65Mx260/1P-SC-H | 10888-260 | B65Hx260/1P-SC-S 4xDN100C cs(54) | | - | B65Hx260/1P-SC-H |
|
| | |
SWEP B65x290 Plate heat exchanger
SWEP B65x290 Plate heat exchanger
from factory (about 8 weeks) from factory (about 8 weeks) from factory (about 8 weeks) |
| Typical use: | Brazed plate heat exchanger for very large heat loads in industry. Also suitable as a steam exchanger, condenser in refrigeration, for very large heat pumps, etc. Available with plates H, M or L to balance capacity and pressure losses. |
| Recommended max. flow 1): | 125 m3/h |
| Brazing material: | copper |
| Model version: | plate exchanger from stainless steel (AISI 316) |
| Dimensions (H × W × D): | 864 × 363 × 690 mm |
| Related products: | Compact counter flange kit DN100 CS, DN100 |
| Testing pressure: | 49 bar |
| Weight: | 341 kg |
| Product sheet: | B65.pdf |
| Item No. 2): | 10890-290 | B65Lx290/1P-SC-S 4xDN100C cs(54) | | - | B65Lx290/1P-SC-H | 10892-290 | B65Mx290/1P-SC-S 4xDN100C cs(54) | | - | B65Mx290/1P-SC-H | 10888-290 | B65Hx290/1P-SC-S 4xDN100C cs(54) | | - | B65Hx290/1P-SC-H |
|
| | |
Chat
⬤
VZH Ostrava, s.r.o.
Pohraniční 1280/112
703 00 Ostrava-Vítkovice
Czech Republic
| L | +44 74 9187 2667 |
| E | +44 74 9187 2667 |
| B | info@heat-exchangers.uk |
| sales@heat-exchangers.uk |
CZ 
SK 
DE